vBulletin Bot automatic poster

Blackbeard

New Member
Here is EzWarez bot, it works well and is only $20.00 from the original Author & his support is great. But like posted in this thread it needs to be authenticated by him on order for it to work.

Product: EzWarez
Version: 2.X
Company: L4N-Soft
Coder: Loser4Now / L4N

First off, I would like to thank you for purchasing EzWarez. This program was coded around simplicity. Therefore, I will try to keep this document as short and as to the point as possible.

Getting Started –
Upon opening EzWarez an authorization screen will appear with a disclaimer. Be read and understand the disclaimer before use. To continue to the program, simply click the button near the bottom of the window.

Once you have been authorized, you will be brought to the main EzWarez window. You will see four different tabs with different options on each one. First you should fill out the Main tab with the correct information about the forum you wish to leech to.

• Select target forum type.
• Enter URL of target web site. Ex: ( www.mytargetsite.com )
• Enter the URL of the new post page. Ex: ( /newpost.phpblahblah )
• Select post interval

Make sure that the target website URL has no slashes in it when you enter it. To get the new post URL, go to your target forum and start to make a new thread. Then copy the part of the URL after the site URL and copy it into the correct field.

Click on the browsers tab. Make sure that you are logged in to both forums at this point. It is necessary to log in to both Warez-bb and your target forum. You will have to click the “Navigate To Target Forum” button in the right browser so that it will go to the site you want.

Once logged in to both forums click the Leech Threads tab. Select the type of threads you would like to leech. If desired, it is possible to change the starting page that the topic leecher will gather threads from. The leecher works chronologically. If you start at page one, it will leech from page two second. It is possible to change the rate at which the leecher leeches thread IDs. You can do this with the int box. I do not suggest messing with this unless you have a very slow connection. It is set to 5 seconds (5000) by default. After you have a decent number of topics, click the remove bad threads button to remove threads that have been recorded to the ref.txt file in the same directory as EzWarez. Warning: if you do not click this option, sticky threads and possibly threads that you have already leeched will be added. You should not have to mess with anything in the advanced tab. This is for forums that have been heavily modified. The advanced tab should auto fill itself out when you select the target forum type in the main tab.

Now you are ready to leech. Go back to the main tab and click start. Once the leecher is finished or told to stop, you will be asked whether or not you want the leeched threads to be added to ref.txt so that they are not leeched in the future.

Trouble Shooting –
-----
I’m leeching to a VBulletin forum and the leecher will not post anything-

Some VBulletin forums are set to use a rich text box posting method by default. This application will not work with this option is enabled. To fix this problem, go to the User CP of the target forum in your regular web browser. Go to the posting options section and make sure that the basic editor is selected as a posting option. Retry leeching, it should work.
-----
I can't leech any topics-

Make sure you are logged in to Warez-bb in the mini web browser.
-----
My antivirus flags the leecher-

The leecher is crypted to prevent crackers from breaking into this program. Some times crypters set of antivirus software. Rest assured, this program is 100% virus / malware free.
-----
I still can't leech anything and I have done everything correctly.

You may have to edit some advanced settings. If you need help then just contact me.

Contact me -
[email protected] Email or MSN
 

shaun166

New Member
i heard about this in many warez forum. can anyone try to crack it or whatever?so that we don't need "authenticated by the owner" and we can use
 

Blackbeard

New Member
Just found this............untested by me I have the ezwarez that works fine, this looks like a hacked version, good luck with it.


Its finally here, the first 100% free, open-source forum leecher! Thanks to Breez, LaLow and Linden for helping me test it the alpha version and MessiaH for providing the above picture.

Futures:
Leeches from PornBB and Warez-BB
Posts to any vBulletin 3.x, IP.Board 2.x and phpBB 2.x/3.x forum
Support for adding [hide] tags around coded content
Support for removing WBB link check info and [mod] tags
Support for deleting all [size] tags
Monitor the current thread being leeched
Build-in internet radio
Etc...
Keep in mind that this is a beta version. Don't reply with stuff like 'zomg wtfux this is sh1t it d0nt worx'...
If you find a bug just report it and I'll look into it.
However also keep in mind that most errors you will encounter will simply be down to the fact that you did something wrong (low timeout value, wrong url, etc...).

Screenshot:


SharpLeech requires the .NET 3.5 Framework to run.
If it crashes when you start it it means you don't have it installed.
I included the .NET installer in the .rar so just install it and it will work.


http://rapidshare.com/files/189318884/SL_BETA_1.rar
 

amn

New Member
Blackbeard said:
Just found this............untested by me I have the ezwarez that works fine, this looks like a hacked version, good luck with it.


Its finally here, the first 100% free, open-source forum leecher! Thanks to Breez, LaLow and Linden for helping me test it the alpha version and MessiaH for providing the above picture.

Futures:
Leeches from PornBB and Warez-BB
Posts to any vBulletin 3.x, IP.Board 2.x and phpBB 2.x/3.x forum
Support for adding [hide] tags around coded content
Support for removing WBB link check info and [mod] tags
Support for deleting all [size] tags
Monitor the current thread being leeched
Build-in internet radio
Etc...
Keep in mind that this is a beta version. Don't reply with stuff like 'zomg wtfux this is sh1t it d0nt worx'...
If you find a bug just report it and I'll look into it.
However also keep in mind that most errors you will encounter will simply be down to the fact that you did something wrong (low timeout value, wrong url, etc...).

Screenshot:


SharpLeech requires the .NET 3.5 Framework to run.
If it crashes when you start it it means you don't have it installed.
I included the .NET installer in the .rar so just install it and it will work.


RapidShare: Easy Filehosting

This bot is very good ..but the link does not work well ...
This is example of how bot posted CODE:

Code:
http://www.xxxxx.com/xxxx/xxx.rar[color=Red]http://www.ccc.com/ccc.rar[/color]....
 

hobbes51

New Member
this is the best tool i have ever seen.. they already updated that code problem

- Added WarezScene leeching support
- Added BayW leeching support
- Added auto-save for the settings, login, url's, ...
- Added 2 radio stations
- Fixed support for 'fancy' usernames/passwords
- Fixed pause, it now does actually pause
- Fixed newline char bug in the thread content textbox
- Fixed bug where some WBB Link check info would not get removed
- #Leech now shows you it is pausing in the status bar
- Some other stuff i forgot ^^

RapidShare: Easy Filehosting
 

chakru

New Member
working working working!! but it seems it has a problem with vbseo installed!

anybody know how to use this?
 

chakru

New Member
its posting on my forums but the problem is it cant able to post on the content area of the forums any help?
 

amn

New Member
Curve said:
Extract the auth.txt file in this folder. Open the file and under the last name paste the number you got from iLeech before followed by a | and whatever name you want to put (without spaces). Save this file.

I do not understand this ??? Can you give me some more info?
 
Top