a few small issues with 3.8.1

M

muppet-modding

New Member
hi all hope someone can help me out here with some small problems

1/ in my vba portal homepage the navbar links to the downloads section [download II] and arcade section [ibproarcade] link me to
Code: 
*************
and /arcades when they should link to
Code: 
*********************
and /arcades, I know this is a noob question but how do I fix this exactly? - FIXED!

2/ after installing MS Panic button exactly how I saw fit by the installation instructions the button gif doesn't show in my postbit, I have enabled the hack, turned it on in my options and so on, i also uploaded the gif to the image folder, what am I missing here?

3/ I installed the latest MGC EVO chatbox, works a treat except for 2 things, notification links are slightly incorrect, showing a p instead of t in the link as follows: good link
Code: 
*********************
bad link
Code: 
************************
is there a fix for this? also some smilies are not showing up anywhere? UPDATE What I can make of it the links to newly created threads are fine as the t in the link implies its a thread, problem is the thread replies that are notified MGC is marking them as threads as well instead of posts, does that help at all?

OK that's all I got, any help would be appreciated thanks
 
AdminCP -> vBulletin Options -> Site Name / URL / Contact Details -> Forum URL

Does this end in /forums? If not, that might fix the first problem.
 
no luck with that method but i figured the links out thanks, i opened admincp>vbacmps>global vba settings>navbar replacements and added arcade.php & downloads.php

okay well thanks for the help so far lads can anyone help with 2 & 3?
 
muppet-modding said:
2/ after installing MS Panic button exactly how I saw fit by the installation instructions the button gif doesn't show in my postbit, I have enabled the hack, turned it on in my options and so on, i also uploaded the gif to the image folder, what am I missing here?
Click to expand...

Reinstall the hack, find the name of the image, that you upload, and then go to your postbit template and search for the "Buttonname.gif" and if it aint there, you'll need to add it at some point.

muppet-modding said:
3/ I installed the latest MGC EVO chatbox, works a treat except for 2 things, notification links are slightly incorrect, showing a p instead of t in the link as follows: good link
Code: 
Link Removed by Request
bad link
Code: 
Link Removed by Request
is there a fix for this? also some smilies are not showing up anywhere? UPDATE What I can make of it the links to newly created threads are fine as the t in the link implies its a thread, problem is the thread replies that are notified MGC is marking them as threads as well instead of posts, does that help at all?

OK that's all I got, any help would be appreciated thanks
Click to expand...

The t=<number> is a thread number, the p=<number> is the post number, MGC Evo obviously treats them as the same, and its not an error as far as can see.
 
fixed the vba_cmps problem mate, prophet helped me out, told me to run the install.php again and chose update image paths, worked a treat

thanks for the input though and can I ask that you remove the links from your quote on the last page? thanks a lot
 
You must log in or register to reply here.
Back
Top